dimensions in millimeters (mm) r ated v oltage 50vdc 250vdc 400vdc 630vdc dim. cap( f) ?d l d? ?d l d? ?d l d? ?d l d? 0.0010 5.0 15.0 0.5 5.0 15.0 0.5 5.0 15.0 0.5 5.0 15.0 0.5 0.0015 5.0 15.0 0.5 5.0 15.0 0.5 5.0 15.0 0.5 6.0 15.0 0.5 0.0022 5.0 15.0 0.5 5.0 15.0 0.5 5.0 18.0 0.5 6.0 21.0 0.5 0.0033 5.0 15.0 0.5 5.0 15.0 0.5 6.0 18.0 0.5 6.0 21.0 0. 5 0.0047 5.0 15.0 0.5 5.5 15.0 0.5 6.0 18.0 0.5 7.0 21.0 0.5 0.0068 5.5 15.0 0.5 5.5 15.0 0.5 7.5 18.0 0.6 7.5 21.0 0.6 0.01 5.5 15.0 0.5 6.0 15.0 0.5 8.5 18.0 0.6 7.5 21.0 0.6 0.015 6.5 15.0 0.5 7.0 15.0 0.6 10.0 18.0 0.6 7.5 24.0 0.6 0.022 6.0 18.0 0.6 7.0 18.0 0.6 9.0 21.0 0.6 8.5 24.0 0.6 0.033 6.5 18.0 0.6 7.0 21.0 0.6 9.5 24.0 0.6 9.5 27.0 0.6 0.047 6.5 21.0 0.6 7.5 21.0 0.6 11.0 24.0 0.6 11.0 27.0 0.6 0.068 7.5 21.0 0.6 8.0 21.0 0.6 10.5 27.0 0.6 13.0 27.0 0.8 0.1 8.0 24.0 0.6 8.5 24.0 0.6 12.5 27.0 0.6 15.0 35.0 0.8 0.15 9.0 24.0 0.6 9.5 24.0 0.8 14.0 33.0 0.8 0.22 10.0 27.0 0.6 10.0 33.0 0.8 16.0 35.0 0.8 0.33 10.5 33.0 0.6 14.0 33.0 0.8 0.47 12.0 33.0 0.6 16.0 34.0 0.8 custom sizes available upon request custom values and tolerances available upon request meritek polyester film capacitors tpen series (axial tubular) f eatures ? high stability and reliability ? excellent environmental performance ? low esr and minimized dissipation factor s pecifications 1. operating temperature: -40 o c to +85 o c 2. capacitance range: 0.001 f to 0.47 f 3. capacitance tolerance: 5%(j), 10%(k), 20%(m) 4. rated voltage: 50vdc, 250vdc, 400vdc, 630vdc 5. dissipation factor: 0.8% max. at 1khz, 25 o c 6. insulation resistance: >20000m (c < 0.1 f) <2000m f (c > 0.1 f) p art n umbering s ystem tpen 102 j 2e meritek series capacitance code 102 103 104 ( pf ) 1,000 10,000 100,000 ( nf ) 1 10 100 ( f ) 0.001 0.01 0.1 tolerance code j k m tolerance (%) 5 10 20 rated voltage code 1h 2e 2g 2j 50v 250v 400v 630v tape & reel / tape & ammo available for diameter 10 mm or smaller please contact factory for part number tpen are constructed with polyester film dielectric, aluminum foil electrodes, tinned copper leads, and an outer wrapping of non- inductive polyester film. both ends are sealed using an epoxy resin. tpen are suitable for use in timing, delay, and oscillation circuits. ideal applications include instruments for telecommunications, i.e. signal coupling and decoupling. ations are subject to change without notice. s pecifications are subject to change without notice. rev.6 a
|